3 - BLOQUES DE COCINA A MEDIDA

Fitting module made of AISI-304 SAT stainless steel with our 27 kW NTGAS-P31 burner, with CE approval.

The module is equipped with the proven burner in all professional chef situations, the vat-like structure, the removable upper iron grill and a mobile control panel for easy installation.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions: 765 x 765 x 200 mm

Fitting hole: 655 x 655 mm

Power: 27 kW

Burners: 1

Gas: Natural / LPG

Water: No

Fitting module made of AISI-304 SAT stainless steel with our 27 kW NTGAS-P31 burner, with CE approval.

The module is equipped with the proven burner in all professional chef situations, the vat-like structure, the removable upper iron grill and a mobile control panel for easy installation.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions: 765 x 765 x 200 mm

Fitting hole: 655 x 655 mm

Power: 27 kW

Burners: 1

Gas: Natural / LPG

Water: Yes

Fitting module made of AISI-304 SAT stainless steel with our 11.5 kW power NTGAS-HQ04 burner, with CE approval.

The module is equipped with the proven burner in all professional chef situations, the vat-like structure, the removable upper iron grill and a mobile control panel for easy installation.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions: 535 x 535 x 180 mm

Insert hole: 455 x 455 mm

Power: 11.5 kW

Burners: 1

Gas: Natural / LPG

Water: No

Fitting module made of AISI-304 SAT stainless steel with our 11.5 kW power NTGAS-HQ04 burner, with CE approval.

The module is equipped with the proven burner in all professional chef situations, the vat-like structure, the removable upper iron grill and a mobile control panel for easy installation.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions: 535 x 535 x 180 mm

Insert hole: 455 x 455 mm

Power: 11.5 kW

Burners: 1

Gas: Natural / LPG

Water: Yes

Fitting module with 3.5 kW of power, with CE approval.

The module is equipped with a high-performance professional induction hob for chefs, a box-like structure and a mobile control panel for easy installation.

Mounting is done on a smooth table, by fixing. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen.

Dimensions: 370 x 297 mm

Snap hole: 361 x 288 mm

Power: 3.5 kW

Resistance diameter: 240 mm

Voltage: 230 V

Fitting module made of AISI-304 SAT stainless steel with our 14 kW burner, with CE approval.

The module is equipped with the contrasted burner in all professional chefs situations, the tank-like structure, the removable upper iron wok and a mobile control panel for easy installation.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions: 535 x 555 x 275 mm

Insert hole: 450 x 370 mm

Power: 14 kW

Worktop: Without water

Gas: Natural / LPG

Fitting module made of AISI-304 SAT stainless steel with our 14 kW burner, with CE approval.

The module is equipped with the contrasted burner in all professional chefs situations, the water tank-like structure, the removable upper iron wok and a mobile control panel for easy installation.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions: 535 x 555 x 275 mm

Insert hole: 450 x 370 mm

Power: 14 kW

Countertop: With water

Gas: Natural / LPG

Fitting module made of AISI-304 SAT stainless steel with our 21 kW burner, with CE approval.

The module is equipped with the contrasted burner in all professional chefs situations, the tank-like structure, the removable upper iron wok and a mobile control panel for easy installation.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions: 535 x 555 x 275 mm

Insert hole: 450 x 370 mm

Power: 21 kW

Worktop: Without water

Gas: Natural / LPG

Fitting module made of AISI-304 SAT stainless steel with our 21 kW burner, with CE approval.

The module is equipped with the contrasted burner in all professional chefs situations, the water tank-like structure, the removable upper iron wok and a mobile control panel for easy installation.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions: 535 x 555 x 275 mm

Insert hole: 450 x 370 mm

Power: 21 kW

Countertop: With water

Gas: Natural / LPG

Fitting module made of AISI-304 SAT stainless steel with our 14 kW burner, with CE approval.

The module is equipped with the contrasted burner in all professional chefs situations, the structure as a smooth worktop, the removable iron top wok and a mobile control panel for easy installation.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions: 555 x 555 x 270 mm

Insert hole: 450 x 370 mm

Power: 14 kW

Countertop: Lisa

Gas: Natural / LPG

Fitting module made of AISI-304 SAT stainless steel with our 21 kW burner, with CE approval.

The module is equipped with the contrasted burner in all professional chefs situations, the structure as a smooth worktop, the removable iron top wok and a mobile control panel for easy installation.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions: 555 x 555 x 270 mm

Insert hole: 450 x 370 mm

Power: 21 kW

Countertop: Lisa

Gas: Natural / LPG

Fitting module made of AISI-304 SAT stainless steel with our 25 kW power forced air burner, with CE approval.

The module is equipped with the proven burner in all professional chefs situations, the worktop-like structure with water, the removable iron top wok and a mobile control panel for easy installation.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions: 540 x 550 x 400 mm

Insert hole: 450 x 370 mm

Power: 25 kW

Countertop: With water

Gas: Natural / LPG

Fitting module made of AISI-304 SAT stainless steel with our 25 kW power forced air burner, with CE approval.

The module is equipped with the contrasted burner in all professional chefs situations, the structure as a smooth worktop, the removable iron top wok and a mobile control panel for easy installation.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions: 545 x 555 x 400 mm

Insert hole: 450 x 370 mm

Power: 25 kW

Countertop: Lisa

Gas: Natural / LPG

Fitting module made of AISI-304 SAT stainless steel with our 7.5 kW burner, with CE approval.

The module is equipped with the proven burner in all professional chefs situations, the water-free bowl-like structure, the removable upper iron grill and a mobile control panel for easy installation.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions: 395 x 395 x 150 mm

Insert hole: 320 x 320 mm

Power: 7.5 kW

Burners: 1

Gas: Natural / LPG

Fitting module made of AISI-304 SAT stainless steel with 2 of our 7.5 kW burners, with CE approval.

The module is equipped with the proven burner in all professional chefs' situations, the water-free bowl-like structure, the removable upper iron grill and a mobile control panel for easy installation.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions: 775 x 395 x 150 mm

Insert hole: 700 x 320 mm

Power: 15 kW

Burners: 2

Water: No

Gas: Natural / LPG

Fitting module made of AISI-304 SAT stainless steel with 2 of our 5 kW burners, with CE approval.

The module is equipped with the contrasted burner in all professional chefs situations, the water tank-like structure, the removable upper iron grill and a mobile control panel for easy installation.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions: 775 x 395 x 150 mm

Insert hole: 700 x 320 mm

Power: 10 kW

Burners: 2

Water: Yes

Gas: Natural / LPG

Fitting module made of AISI-304 SAT stainless steel with 3 of our 7.5 kW burners, with CE approval.

The module is equipped with the proven burner in all professional chefs' situations, the water-free bowl-like structure, the removable upper iron grill and a mobile control panel for easy installation.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions: 1155 x 395 x 150 mm

Insert hole: 1080 x 320 mm

Power: 22.5 kW

Burners: 3

Water: No

Gas: Natural / LPG

Fitting module made of AISI-304 SAT stainless steel with 3 of our 5 kW burners, with CE approval.

The module is equipped with the contrasted burner in all professional chefs situations, the water tank-like structure, the removable upper iron grill and a mobile control panel for easy installation.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions: 1155 x 395 x 150 mm

Insert hole: 1080 x 320 mm

Power: 15 kW

Burners: 3

Water: Yes

Gas: Natural / LPG

Gas kitchen built-in module made of AISI-304 SAT stainless steel with 2 burners (1 x 7.5 kW + 1 x 5 kW), with CE approval.

The module is equipped with a proven burner in all professional chef situations, a stamped top plane with a spill edge and a movable control panel for easy installation.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions:775 x 395 x 230 mm

Insert hole: 630 x 280 mm

Power: 12,5 kW

Burners: 1 x 7.5 kW + 1 x 5 kW

Gas: Natural / LPG

Gas kitchen built-in module made of AISI-304 SAT stainless steel with 4 burners (2 x 4.5 kW + 2 x 7.5 kW), with CE approval.

The module is equipped with a proven burner in all professional chef situations, a stamped top plane with a spill edge and a movable control panel for easy installation.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions: 800 x 700 mm

Insert hole: 765 x 620 mm

Power: 24 kW

Burners: 2 x 4.5 kW + 2 x 7.5 kW

Gas: Natural / LPG

Built-in module for a gas fryer with 1 tank of 13 liters made of stainless steel AISI-304 SAT with 11.2 kW, with CE approval.

The module is equipped with the proven high-power burner in all chefs' professional situations, a stamped top plane with a spill edge and a mobile control panel for easy installation.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions: 400 x 700 mm

Insert hole: 340 x 640 mm

Power: 11.2 kW

Capacity: 1 x 13 liters

Gas: Natural / LPG

Fitting module for a 1-tank 17-liter gas fryer made of stainless steel AISI-304 SAT with 16.5 kW, with CE approval.

The module is equipped with the proven high-power burner in all chefs' professional situations, a stamped top plane with a spill edge and a mobile control panel for easy installation.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions: 400 x 700 mm

Insert hole: 340 x 640 mm

Power: 16.5 kW

Capacity: 1 x 17 liters

Gas: Natural / LPG

Built-in module for a 13-liter 2-tank gas fryer made of AISI-304 SAT stainless steel with 22.4 kW, with CE approval.

The module is equipped with the proven high-power burner in all chefs' professional situations, a stamped top plane with a spill edge and a mobile control panel for easy installation.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions: 800 x 700 mm

Snap hole: 2 X (340 x 640 mm)

Power: 22.4 kW

Capacity: 2 x 13 liters

Gas: Natural / LPG

Fitting module for a gas fryer with 2 tanks of 17 liters made of stainless steel AISI-304 SAT with 33 kW, with CE approval.

The module is equipped with the proven high-power burner in all chefs' professional situations, a stamped top plane with a spill edge and a mobile control panel for easy installation.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions: 800 x 700 mm

Snap hole: 2 X (340 x 640 mm)

Power: 33 kW

Capacity: 2 x 17 liters

Gas: Natural / LPG

Built-in module for a 13-liter 1-deep electric fryer made of stainless steel AISI-304 SAT with 12 kW, with CE approval.

The module is equipped with proven high-power resistors in all professional chef situations, a stamped top plane with a spill edge and a movable control panel for easy installation.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions: 400 x 610 mm

Fitting hole: 330 x 550 mm

Power: 12 kW

Capacity: 1 x 13 liters

Voltage: 400V

Built-in module for a 17-liter 1-bowl electric fryer made of AISI-304 SAT stainless steel with 16.5 kW, with CE approval.

The module is equipped with proven high-power resistors in all professional chef situations, a stamped top plane with a spill edge and a movable control panel for easy installation.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions: 400 x 610 mm

Fitting hole: 330 x 550 mm

Power: 16.5 kW

Capacity: 1 x 17 liters

Voltage: 400V

Built-in module for a 13-liter 2-bowl electric fryer made of 24 kW AISI-304 SAT stainless steel, with CE approval.

The module is equipped with proven high-power resistors in all professional chef situations, a stamped top plane with a spill edge and a movable control panel for easy installation.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions: 800 x 610 mm

Insert hole: 730 x 550 mm

Power: 24 kW

Capacity: 2 x 13 liters

Voltage: 400V

Built-in module for a 17-liter 2-bowl electric fryer made of 33 kW AISI-304 SAT stainless steel, with CE approval.

The module is equipped with proven high-power resistors in all professional chef situations, a stamped top plane with a spill edge and a movable control panel for easy installation.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions: 800 x 610 mm

Insert hole: 730 x 550 mm

Power: 33 kW

Capacity: 2 x 17 liters

Voltage: 400V

Fitting module for gas chrome-plated iron made of AISI-304 SAT stainless steel with 6 kW of power, with CE approval.

The module is equipped with proven high-power burners in all professional chef situations, a stamped top surface with a spill edge and a movable control panel for easy installation.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions: 400 x 700 mm

Insert hole: 345 x 660 mm

Power: 6 kW

Gas: Natural / LPG

Fitting module for gas chromium plate made of stainless steel AISI-304 SAT with 12 kW of power, with CE approval.

The module is equipped with proven high-power burners in all professional chef situations, a stamped top surface with a spill edge and a movable control panel for easy installation.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions: 800 x 700 mm

Fitting hole: 745 x 660 mm

Power: 12 kW

Gas: Natural / LPG

Fitting module for electric chromium plate made of AISI-304 SAT stainless steel with 5.4 kW of power, with CE approval.

The module is equipped with proven high-power resistors in all professional chef situations, a stamped top plane with a spill edge and a movable control panel for easy installation.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions: 400 x 610 mm

Fitting hole: 375 x 550 mm

Power: 5.4 kW

Voltage: 400V

Fitting module for electric chromium plate made of AISI-304 SAT stainless steel with 10.8 kW of power, with CE approval.

The module is equipped with proven high-power resistors in all professional chef situations, a stamped top plane with a spill edge and a movable control panel for easy installation.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions: 800 x 610 mm

Insert hole: 775 x 550 mm

Power: 10.8 kW

Voltage: 400V

Plug-in module for electric radiant plate made of AISI-304 SAT stainless steel with 5 kW of power, with CE approval.

The module is equipped with proven high-power resistors in all professional chefs' situations, a stamped upper plane, with a thermostatic valve and with a spill edge and a mobile control panel for easy installation.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions: 350 x 570 x 95 mm

Insert hole: 335 x 545 mm

Power: 5 kW

Voltage: 400V

Built-in electric radiant plate module made of AISI-304 SAT stainless steel with 10 kW of power, with CE approval.

The module is equipped with proven high-power resistors in all professional chefs' situations, a stamped upper plane, with a thermostatic valve and with a spill edge and a mobile control panel for easy installation.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions: 570 x 750 x 100 mm

Snap hole: 545 x 690 mm

Power: 10 kW

Voltage: 400V

Gas radiant plate insert module made of AISI-304 SAT stainless steel with 6 kW of power, with CE approval.

The module is equipped with proven high-power burners in all professional chef situations, a stamped top surface with a spill edge and a movable control panel for easy installation.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in yourcase, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions: 400 x 700 x 310 mm

Fitting hole: 310 x 505 mm

Power: 6 kW

Gas: Natural / LPG

Gas radiant plate insert module made of AISI-304 SAT stainless steel with 10.4 kW power, with CE approval.

The module is equipped with proven high-power burners in all professional chef situations, a stamped top surface with a spill edge and a movable control panel for easy installation.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions: 795 x 695 x 300 mm

Insert hole: 720 x 505 mm

Power: 10.4 kW

Gas: Natural / LPG

DimSum electric vaporizer built-in module made of AISI-304 SAT stainless steel with 7 kW of power, with CE approval.

The module is equipped with proven high-power resistors in all professional chef situations, a stamped top plane with a spill edge and a movable control panel for easy installation. It also includes bamboo baskets.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions: 400 x 610 mm

Fitting hole: 370 x 580 mm

Power: 7 kW

Capacity: 1 x 24 liters

Baskets: 4 x 150 mm

Voltage: 400V

DimSum electric vaporizer built-in module made of stainless steel AISI-304 SAT with 14 kW of power, with CE approval.

The module is equipped with proven high-power resistors in all professional chef situations, a stamped top plane with a spill edge and a movable control panel for easy installation. It also includes bamboo baskets.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions: 800 x 610 mm

Insert hole: 670 x 580 mm

Power: 14 kW

Capacity: 1 x 55 liters

Baskets: 6 x 180 mm

Voltage: 400V

Electric pasta cooker insert module made of stainless steel AISI-304 SAT with 11 kW of power, with CE approval.

The module is equipped with proven high-power resistors in all professional chef situations, a stamped top plane with a spill edge and a movable control panel for easy installation. Baskets and lids not included.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions: 400 x 610 mm

Insert hole: 360 x 550 mm

Power: 11 kW

Capacity: 1 x 28 liters

Voltage: 400V

Electric pasta cooker insert module made of AISI-304 SAT stainless steel with 22 kW of power, with CE approval.

The module is equipped with proven high-power resistors in all professional chef situations, a stamped top plane with a spill edge and a movable control panel for easy installation. Baskets and lids not included.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions: 800 x 610 mm

Insert hole: 760 x 550 mm

Power: 22 kW

Capacity: 2 x 28 liters

Voltage: 400V

Gas pasta cooker insert module made of stainless steel AISI-304 SAT with 11 kW of power, with CE approval.

The module is equipped with proven high-power burners in all professional chef situations, a stamped top plane with a spill edge and a movable control panel for easy installation. Baskets and lids not included.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions: 400 x 610 mm

Fitting hole: 350 x 645 mm

Power: 11 kW

Capacity: 1 x 28 liters

Gas: Natural / LPG

Gas pasta cooker insert module made of stainless steel AISI-304 SAT with 22 kW of power, with CE approval.

The module is equipped with proven high-power burners in all professional chef situations, a stamped top plane with a spill edge and a movable control panel for easy installation. Baskets and lids not included.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions: 800 x 700 mm

Fitting hole: 750 x 645 mm

Power: 22 kW

Capacity: 2 x 28 liters

Gas: Natural / LPG

Built-in electric bain-marie module made of AISI-304 SAT stainless steel with 1.5 kW of power, with CE approval.

The module is equipped with proven high-power resistors in all professional chef situations, a stamped top plane with a spill edge and a movable control panel for easy installation. Baskets not included.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions: 400 x 610 mm

Insert hole: 370 x 550 mm

Power: 1.5 kW

Capacity: GN 1/1

Voltage: 230 V

Built-in electric bain-marie module made of stainless steel AISI-304 SAT with 3 kW of power, with CE approval.

The module is equipped with proven high-power resistors in all professional chef situations, a stamped top plane with a spill edge and a movable control panel for easy installation. Baskets not included.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions: 800 x 610 mm

Insert hole: 770 x 550 mm

Power: 3 kW

Capacity: GN 2/1

Voltage: 230 V

Fitting module for electric barbecue made of AISI-304 SAT stainless steel with 4.08 kW power, with CE approval.

The module is equipped with proven high-power stainless steel heating elements in all professional chefs' situations, a stamped top plane with a spill edge and a mobile control panel for easy installation.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions: 400 x 610 mm

Fitting hole: 375 x 550 mm

Power: 4.08 kW

Voltage: 400V

Fitting module for electric barbecue made of AISI-304 SAT stainless steel with 8.16 kW power, with CE approval.

The module is equipped with proven high-power stainless steel heating elements in all professional chefs' situations, a stamped top plane with a spill edge and a mobile control panel for easy installation.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions: 800 x 610 mm

Insert hole: 775 x 550 mm

Power: 8.16 kW

Voltage: 400V

Built-in lava stone gas barbecue module made of stainless steel AISI-304 SAT with 8 kW of power, with CE approval.

The module is equipped with proven high-power burners in all professional chef situations, a stamped top plane with a spill edge and a movable control panel for easy installation.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions: 400 x 610 mm

Fitting hole: 375 x 550 mm

Power: 8 kW

Gas: Natural / LPG

Built-in lava stone gas barbecue module made of AISI-304 SAT stainless steel with 16 kW of power, with CE approval.

The module is equipped with proven high-power burners in all professional chef situations, a stamped top plane with a spill edge and a movable control panel for easy installation.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions: 800 x 610 mm

Insert hole: 775 x 550 mm

Power: 16 kW

Gas: Natural / LPG

Charcoal barbecue insert module with the external structure made of AISI-304 SAT stainless steel welded and reinforced.

The module is equipped with insulation with refractory stone, cast iron support, welded iron chamber, combustion draft control (with gimbal), ash drawer and upper grill with stainless steel rods.

Mounting is done on a smooth table, by fixing with M6 bolts. The control panel is mobile both laterally and in depth for the variety of tables on the market.

It is perfect for making custom kitchen blocks or for taking up free space in a kitchen. The assembly is very simple by dropping the machine on the hole that is left on the table where it is going to be installed. It also has the advantage that it is easier to repair in your case, since it is not necessary to disassemble an entire kitchen, and the bolts are simply loosened.

Dimensions: 695 x 625 x 296/163 mm

Snap hole: 595 x 530 mm

Grill size: 623 x 550 mm

Heights: 5